Select "Exit Saving Changes." Press
6.
At the prompt, to confirm exiting setup, press
7.
Exit the Setup utility.
NOTE
computer has entered power-saving mode, just
move your mouse or press a key, and your
computer is active again.
Protecting Your System
Your system's security features provide protection against
unauthorized access to your system and data. This
protection includes a user and supervisor password.
Dual password security provides two levels of password
security. A "Supervisor password" allows access to the
system's Setup utility for system configuration. A "User
password" allows system bootup only after the entry of a
password.
When you start up your system for the first time, you are
asked to enter a system password. The following section
explains the password procedure.
Setting a Password
Use the following procedure to set a password.
Turn on or reboot your system. Setup displays the
1.
following message:
2.
Press
Using your arrow keys, select Security from the menu
3.
bar. The Security menu appears.
When you want to resume work after your
Press <F2> to enter SETUP
F2
. Setup's Main menu appears.
.
Enter
.
Enter
Using Your Computer 2-9