When you start up your system for the first time, you are
asked to enter a system password. The following section
explains the password procedure.
Setting a Password
Use the following procedure to set a password.
1.
Turn on or reboot your system. Setup displays the
following message:
Press
2.
Using your arrow keys, select Security from the menu
3.
bar. The Security menu appears.
Select "Set Administrator Password" or "Set User
4.
Password" with the arrow keys and press
NOTE
requires that a password be entered before entering
the Setup Utility.
Setup displays a dialog box with the following
prompts:
5.
Type your password and press
case-sensitive. Reenter your password and press
again.
6.
Use the arrow keys to select Exit.
7.
Select "Exit Saving Changes." Press
2-10 Using Your Computer
Press <F2> to enter SETUP
. Setup's Main menu appears.
F2
Enabling the Administrator Password feature
Enter new password: [
Confirm new password: [
.
Enter
]
]
Enter
. Passwords are not
Enter
Enter
.