Cix40 Cabinet Specifications; Safety Registration; Cix40 Chsu40A3 Fcc/Acta Registration Number; Telephone Compatibility - Toshiba Strata CIX40 R5.2 Software - R1 ~ R3 Hardware Installation And Maintenance Manual

CIX40 Cabinet Specifications

Table 1-3, below, lists the CIX40 cabinet specifications.
Table 1-3 CIX40 Cabinet Specifications
Cabinet
Cabinet (CHSU40A, CHSU40A2 and CHSU40A3)
The system cabinet contains the GMAU2/3/4 and
GMAS2/3/4 motherboards

Safety Registration

• UL60950-1 (USA)
CSA22.2 NO.60950-1-3 (Canada)
•
CIX40 CHSU40A3 FCC/ACTA Registration
Number
ACTA/FCC Part 68 Registration for Multifunction Code (MF): CJ6MF03BDTCHS403
•
Note For earlier systems refer to version C2 of this manual, available on theToshiba FYI web site.

Telephone Compatibility

The Strata CIX40 supports all current Toshiba 2000-series, 3000-series, 3200-series, and
DP5000-series digital telephones, IP telephones, Add-on Modules, DSS Consoles, and
CIX Attendant Consoles.
Generic single-line telephones (2500-sets) are compatible. The Strata CIX40 does not support
analog electronic telephones (6500-series, 6000-series, etc.).
DKT stations connected to the CIX40 support Handset Off-hook Call Announce (OCA) but not
Speaker OCA.
IPT stations connected to the CIX40 support both Handset Off-hook Call Announce (OCA) and
Speaker OCA.
Note An IPT does not require a BVSU to receive Speaker OCA (S-OCA) but does require an
additional IP channel on the GIPH, GIPU8, MIPU16, or MIPU24 IP interface card. If an IPT
is enabled to receive S-OCA a second IP channel will be reserved automatically for this IPT.
If no IP channel is available when enabling S-OCA eManager will receive an error message.
Only one IP End Point license is required for an IPT to receive speaker OCA even though
two IP channels are needed. Use PROG 204-06 to select Speaker OCA as the type to
receive. Use PROG 103-38 to enable a COS to receive OCA. Use PROG 200-04 to put the
telephone in a COS that is enabled to receive OCA.
Toshiba IP Telephones, Soft IPT and SIP phones are supported by the CIX40.
Strata CIX40 R3 Installation & Maintenance
Weight
6.6 lbs.
(3 kg)
05/10
CIX40 Installation
CIX40 Cabinet Specifications
Height Width Depth
17.7 in. 12.2 in.
(45 cm) (31 cm) (8.5 cm)
3.3 in.
1-5