Getting started
Factory default Transparent mode network configuration
Factory default firewall configuration
FortiGate-400 Installation and Configuration Guide
Table 2: Factory default NAT/Route mode network configuration (Continued)
Interface 4/HA
If you switch the FortiGate unit to Transparent mode, it has the default network
configuration listed in
Table
Table 3: Factory default Transparent mode network configuration
Administrator
account
Management IP
DNS
Management access
The factory default firewall configuration is the same in NAT/Route and Transparent
mode.
Table 4: Factory default firewall configuration
Port 1
Port1_All
Address
Port 2
Port2_All
Address
Recurring
Always
Schedule
Firewall
Port1->Port2
Policy
Source
Destination Port2_All
Schedule
Service
Factory default FortiGate configuration settings
IP:
Netmask:
Management Access:
3.
User name:
Password:
IP:
Netmask:
Primary DNS Server:
Secondary DNS Server:
Interface 1
Interface 2
Interface 3
Interface 4/HA
IP: 0.0.0.0
Represents all of the IP addresses on the network
connected to port 1.
Mask: 0.0.0.0
IP: 0.0.0.0
Represents all of the IP addresses on the network
connected to port 2.
Mask: 0.0.0.0
The schedule is valid at all times. This means that
the firewall policy is valid at all times.
Firewall policy for connections from the internal
network to the external network.
Port1_All
The policy source address. Internal_All means that
the policy accepts connections from any internal IP
address.
The policy destination address. External_All means
that the policy accepts connections with a
destination address to any IP address on the
external network.
Always
The policy schedule. Always means that the policy
is valid at any time.
ANY
The policy service. ANY means that this policy
processes connections for all services.
0.0.0.0
0.0.0.0
Ping
admin
(none)
10.10.10.1
255.255.255.0
207.194.200.1
207.194.200.129
HTTPS, Ping
Ping
Ping
Ping
35