Applying The Fxo Gateway Configuration - Fortinet FortiVoice FXO Deployment Manual

Deployment
GUI field
Admin user name
Admin password
Serial number
Type
MAC address
Description
5. Click Create .
The FortiVoice phone system creates a trunk profile. By default, all eight ports are mapped to a single trunk.
You have completed this procedure.
6. Go to
Applying the FXO gateway configuration on page

Applying the FXO gateway configuration

The FortiVoice phone system stores a gateway configuration file. Use this procedure to apply this gateway configuration
file to the FXO gateway.
Procedure steps
1. In the web-based manager of the FortiVoice phone system, go to Managed System > Gateway .
2. In the FXO Gateway tab, review the list and select the gateway to which you want to apply the configuration file.
3. Click Apply configuration .
FortiVoice displays the following message:
Do you really want to update selected gateway?
4. Click OK .
The FortiVoice phone system applies configuration changes to the dial plan routes of the FXO gateway.
With a successful update, the FXO gateway displays the following message:
Gateway upgrade finished.
Successful:<gateway_name>
5. Click OK .
FortiVoice 6.0.5 FXO Gateway Deployment Guide
Fortinet Technologies Inc.
Description
Connect Device : This procedure does not use this button. With this button,
you would access the FortiVoice Gateway web-based manager in a separate
tab in your web browser.
Enter the user name of the administrator account used for logging in to the
FXO gateway.
The default is admin.
Enter the password associated with the Admin user name.
To show the password, click the eye icon
The default is no password.
The serial number of the FXO gateway that you are adding to the FortiVoice
phone system.
The type of gateway that you are adding to the FortiVoice phone system.
The MAC address of the FXO gateway that you are adding to the FortiVoice
phone system.
Optionally, add any applicable notes for this gateway.
17.
.
17