Adding Interfaces To A Zone; Adding Vlan Subinterfaces To A Zone; Renaming Zones - Fortinet FortiGate 400 Installation & Configuration Manual

Fortinet network device installation and configuration guide
Table of Contents

Advertisement

Configuring zones

Adding interfaces to a zone

Adding VLAN subinterfaces to a zone

Renaming zones

134
3
Type a Name for the zone.
The name can contain numbers (0-9), uppercase and lowercase letters (A-Z, a-z), and
the special characters - and _. Other special characters and spaces are not allowed.
4
Optionally select Block intra-zone traffic to block traffic between interfaces in the same
zone.
5
Select OK to add the zone.
The zone now appears on the firewall policy grid.
You can add one or more interfaces to a zone. If you have added firewall addresses to
an interface, you must delete these firewall addresses before you can add the
interface to a zone. See
interface to a zone, you cannot add firewall addresses to the interface and the
interface does not appear on the policy grid.
1
Go to System > Network > Interface.
2
For the interface to add to a zone, select Modify
3
Use the Zone list to select the zone to add the interface to.
4
Select OK to save your changes.
5
Repeat these steps to add more interfaces to zones.
You can add one or more VLAN subinterfaces to a zone. If you have added firewall
addresses to a VLAN subinterface, you must delete these firewall addresses before
you can add the VLAN subinterface to a zone. See
When you add a VLAN subinterface to a zone, you cannot add firewall addresses to
the VLAN subinterface and the VLAN subinterface does not appear on the policy grid.
1
Go to System > Network > Interface.
2
For the VLAN subinterface to add to a zone, select Modify
3
Use the Zone list to select the zone to add the VLAN subinterface to.
4
Select OK to save your changes.
5
Repeat these steps to add more VLAN subinterfaces to zones.
You can change the name of any zone in the zone list.
1
Go to System > Network > Zone.
2
Choose a zone to rename and select Edit zone
3
Enter a new name for the zone.
4
Select OK to save your changes.
"Deleting addresses" on page
Network configuration
180. When you add an
.
"Deleting addresses" on page
.
.
180.
Fortinet Inc.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents