Table of Contents
Advertisement
Hardware installation
Inserting AMC slot filler panels
1
2
3
4
5
Inserting AMC modules
FortiGate-5001A Security System Guide
01-30000-83456-20081023
The following procedure describes how to install a slot filler panel in the
FortiGate-5001A front panel AMC opening. The FortiGate-5001A-DW board
includes one AMC double-width slot filler panel and the FortiGate-5001A-SW
board includes one AMC single-width slot filler panel.
Caution: Do not operate the FortiGate-5001A board with an open AMC opening. For
optimum cooling performance and safety, the AMC opening must contain a slot filler panel
or a FortiGate AMC module.
Caution: Because the FortiGate-5001A board does not support hot swapping AMC
modules, you must eject the FortiGate-5001A board from its chassis slot and completely
open the handles before inserting or removing AMC modules or slot filler panels.
To install an AMC slot filler panel
To complete this procedure, you need:
•
FortiGate-5001A board with an empty AMC slot
•
An electrostatic discharge (ESD) preventive wrist strap with connection cord
Caution: FortiGate-5001A boards must be protected from static discharge and physical
shock. Only handle or work with FortiGate-5001A boards at a static-free workstation.
Always wear a grounded electrostatic discharge (ESD) preventive wrist strap when
handling FortiGate-5001A boards.
Attach the ESD wrist strap to your wrist and to an available ESD socket or wrist
strap terminal.
Eject the FortiGate-5001A board from the chassis slot.
With the FortiGate-5001A left (top) handle fully open, pull the latch on the slot filler
front panel to the extended position.
Insert the slot filler panel by applying moderate force to the front faceplate to slide
the slot filler panel into the opening.
The slot filler panel should glide smoothly into the opening. If you encounter any
resistance while sliding the slot filler panel in, the slot filler panel could be aligned
incorrectly. Pull the slot filler panel back out and try inserting it again.
Press the latch in the slot filler front panel to lock in the slot filler panel.
The following procedure describes how to install an AMC module into your
FortiGate-5001A front panel AMC opening. Insert the fiber transceivers into the
module before inserting the module into the FortiGate unit. For details on installing
the transceivers, see the
QuickStart Guide
To insert an AMC module into a FortiGate-5001A board
Caution: Do not operate the FortiGate-5001A board with an open AMC opening. For
optimum cooling performance and safety, the AMC opening must contain a slot filler panel
or a FortiGate AMC module.
Caution: Because the FortiGate-5001A board does not support hot swapping AMC
modules, you must eject the FortiGate-5001A board from its chassis slot and completely
open the handles before inserting or removing AMC modules or slot filler panels.
Installing and removing AMC modules
for the AMC module.
21
Advertisement
Table of Contents
