Fortinet FortiGate 5001A-DW User Manual page 19

Hardware installation
3
4
5
6
7
8
9
FortiGate-5001A Security System Guide
01-30000-83456-20081023
Fully loosen the retention screws on the FortiGate-5001A front panel.
Retention
Screw
Loosen
Unlock the handles by squeezing the handle locks.
Open the handles to their fully open positions.
Caution: To avoid damaging the lock, make sure you squeeze the handles fully to unlock
them before opening. The handles should pop easily out of the board front panel.
You need to open the handles with moderate pressure to eject the board from the
chassis. Pivoting the handles turns off the microswitch, turns off all LEDs, and
ejects the board from the chassis slot.
Alignment Pin
Handle
Open
Lock
Pull the board about half way out.
Turn both handles to their fully-closed positions.
Alignment Pin
Close
Handle
Carefully slide the board completely out of the slot.
Re-attach the protective metal frame before shipping or storing the
FortiGate-5001A board.
Removing a FortiGate-5001A board
Alignment Pin
Handle
Alignment Pin
Handle
Fully Closed
and Locked
19