Heat Blast; Program Schedule Holds; Temporary - Aprilaire 8620 Owner's Manual

pROGRAM SCHEDUlE AND HOlDS
CHANGING pROGRAM SCHEDUlES
(CONTINUED)
press [Next], then [fAN] to set the fan mode of the
first event .
press [Next] to advance to the next event .
repeat above process for each remaining event.
press [DONE] to save the schedule for the day .
26
The thermostat will display the CoPy option.
press [COpy] to copy the schedule of the day just
programmed to any other day .
OR
press [CANCEl] to proceed to the next day and repeat
the above process.
pROGRAM SCHEDUlE AND HOlDS

HEAT BlAST

™
Heat Blast will raise the current room temperature 3°F
™
to 5°f based on the installer set-up, and then resume
normal operation .
press [Heat Blast] to activate Heat Blast .
Note: Heat Blast button is only available if it is enabled
in the Installer Setup and the thermostat is in Heat or
Emergency Heat mode .
To cancel Heat Blast
press [CANCEl], or
[Heat Blast], or the
temperature adjust
buttons.
pROGRAM SCHEDUlE HOlDS – TEMpORARy
TEMpORARy pROGRAM HOlD
press or to immediately adjust the temperature
when the schedule is running . This will temporarily hold
the temperature setting until the next scheduled event .
27