Heat Blast® (If Installed); Away (If Installed) - Aprilaire 8840M Owner's Manual

SCHEDULE AND HOLDS
SCHEDULE HOLDS (continued)
Heat Blast® (if installed)
Heat Blast will raise the current room
temperature by 3°F to 5°F once, and then
resume normal operation . This feature is
only available if it was enabled by your
installer and the thermostat is in Heat or
Emergency Heat mode .
1.
HEAT BLAST
Touch to activate Heat
Blast .
2.
Touch HEAT BLAST again, or adjust
the temperature with the
arrows to cancel Heat Blast .

Away (if installed)

The Away feature allows the thermostat
to switch to predefined setpoints simply
by touching AWAY . The default cooling
setpoint is 85°F (29 . 5 °C), the default
heating setpoint is 62°F (16 . 5 °C) and the
default fan mode is Auto . The default
settings can be modified in the User
Preferences screen . See pages 33-35 .
1.
Touch AWAY to activate the Away
AWAY
mode . Touch again to
deactivate the Away mode .
or
2
1
1
21