User System Settings Table - Aprilaire 8620 Owner's Manual

SETUp MENU

USER SySTEM SETTINGS TABlE

The following table is the list of the settings and their details. Default settings are shown in bold .
User system
setting Description
Temperature Set the thermostat to Fahrenheit
scale or Celsius mode
Screen lockout Screen lockout level
Partial lockout type (only available when screen
lockout is set to partial lockout)
Max Temp Setpoint Select temperature setpoint
Change in Lockout limits (only available when
screen lockout is set to partial)
Max Dehum Select dehumidification setpoint
Setpoint Change in limits (only available when
Lockout screen lockout is set to partial)
Events per day number of program events
per day .
32
factory default setting (bold) and setting range
fahrenheit
Celsius
Off : No lockout
Partial lockout
Full lockout
Allow changes to fan Mode, System Mode and Setpoints
Allow changes to Fan Mode and Setpoints only
Allow changes to Setpoints only
3 degrees
0 to 20 degrees
5 percent Relative Humidity
0 to 15 percent Relative Humidity
4 events per day
2 events per day
SETUp MENU
USER SySTEM SETTINGS TABlE
(CONTINUED)
User system
setting Description
Backlight intensity Backlight intensity as a
percentage of full on
Daylight savings Enable or disable auto daylight
savings
Reset Service Clears the Change Air Filter and
reminders HVAC and Dehumidifier Service
reminders if they are active
and resets the start date to the
current date .
Clears the Change water Panel
reminder if it is active . If the
reminders is set to timed, the
clock will be reset.
factory default setting (bold) and setting range
100
Selection of 0 – 100%
OFF
Second Sunday in March to the first Sunday in November
first sunday in April to the last sunday in october
No
yes
33