Table of Contents
Advertisement
Add/Edit Device Parameter dialog (Cont.)
Reset Value:
Trigger:
Use Range (Number):
Use Units (Number or String): Defines the unit type for the parameter, e.g., minutes, hours, degrees, or %.
Set Range (Enum or Index):
OK:
Cancel:
Edit Parameter Indices dialog
FIG. 19
Edit Parameter Indices dialog
Edit Parameter Indices dialog
Add string:
Remove:
Move Up:
Move Down: Moves the string down the list of parameter use.
OK:
Cancel:
RMS CodeCrafter
A text field you can edit to set reset value.
32-bit signed number for Number, 16-bit unsigned number for Index and any
string up to 100 characters for String and Enum.
Select one of the following:
• None
• Button
• Channel
• Level
Sets the minimum and maximum for number; this value is optional.
This value is optional.
A drop down list of enumeration strings. You can elect to:
• Add - adds the sting to the parameter use.
• Remove - removes the string from parameter use.
• Move Up - moves the string up the list of parameter use.
• Move Down - moves the string down the list of parameter use.
Closes this dialog and saves changes made.
Closes this dialog without implementing changes.
Adds the sting to the parameter use.
Removes the string from parameter use.
Moves the string up the list of parameter use.
Closes this dialog and saves changes.
Closes this dialog without implementing changes.
RMS CodeCrafter Project Pages
31
Advertisement
Table of Contents
