Table of Contents
Advertisement
20.
Once you have included all of your device parameters for your project, click Next. The next page is
i!-ConnectLinx Touch Panel Button Mappings.
21.
To edit an i!-ConnectLinx entry, select the function from the list and click Edit Function to open the Edit
Touch Panel Button-mappings.
22.
Once you have included all of your button-mappings for your project, click Next. The next page is
Generate NetLinx Code File.
23.
Either type the file name and target destination or click Browse and specify the location. Once you have
entered the information, click Generate.
24.
The next and final page is Code Generation Wizard - Finished. You will see this page if the NetLinx
include file was successfully created. Displayed within the page is the file name and target destination.
25.
Click Finish.
Saving A Device Template File
Once you have created a Device Template it is necessary to save it order to keep changes made.
1.
With the Device Template open, select File > Save.
2.
Select the target location for the file and click Save.
Saving A Project File
Once you have created a RMS CodeCrafter file, it is necessary to save the file. You can then return to the file at
a later date.
1.
With the project file open, select File > Save.
2.
Select the target location to save the file.
3.
Click Save.
Opening An Existing Device Template
You can create persistent templates for monitored devices, where you provide the settings and parameters.
RMS CodeCrafter can then use the device templates for similar or the same devices in other projects.
If you already created a template, you can open and use it following these steps:
1.
With RMS CodeCrafter wizard open to the Introductory page, click Open Device Template to launch the
Open RMS CodeCrafter Device Template window.
2.
Select the template file (.CGT) you would like to use and click Open.
3.
The wizard opens to Device Template Main page.
Follow these steps to edit your template:
1.
Type the name of your Template in the field Template Name.
2.
Type the manufacturer name in the field Manufacturer.
3.
Type the model in the field Model.
RMS CodeCrafter
Basic Operations
43
Advertisement
Table of Contents
