AMX RMS CodeCrafter Operation/Reference Manual page 29

Add/Edit Named Devices dialog
FIG. 13 Add/Edit Named Devices dialog
The Add/Edit Named Devices dialog is available to add and edit named devices:
Add/Edit Named Devices dialog
Device:
Logical Name: Enter a name for the device in this text field.
OK:
Cancel:
Add All Welcome and Main Panels dialog
When you click Add all Welcome and Main Panels, CodeCrafter searches the existing Main and Welcome
panels for defined devices that are not already listed on the Named Devices list. All devices found are
compiled into a list and appear in the Add All Welcome and Main Panels dialog. The options in this dialog
allow you to select any, all or none for your use.
In the event no devices are found, this window will inform you none were found.
The grid list is all defined devices found in the Main and Welcome panels. Any entry not selected with a check
is not included in the project. The Device column is the device name and the Logical Name column is the
associated name for that device. CodeCrafter uses the panel description for the logical name, it can be changed
after you add it to the list (Add/Edit Named Devices).


RMS CodeCrafter
Select a Base Device from a drop down list of devices extracted from the integrated NetLinx
file. You can select an existing device, enter a new device, or enter a D:P:S address.
If you select an existing device or enter a new device, a warning for the device is added to the
generated code file.
Accepts changes and closes this dialog.
Closes this dialog and does not save changes.
OK - Accepts changes and closes window.
Cancel - Closes window and does not keep changes.
RMS CodeCrafter Project Pages
25