Radio Operations; Manual Tuning; Automatic Seek Tuning; Manual Storing Of Station Presets - Alpine CDA-7894RB Owner's Manual

Radio Operations

SOURCE TUNE/A.ME
g DN f UP F

Manual Tuning

1
Press the SOURCE button to select the radio mode.
2
Press the BAND button repeatedly until the desired
radio band is displayed.
Each press changes the band:
→ FM1→ FM2→ FM3→ MW → LW
3
Press the TUNE button repeatedly until "DX SEEK"
and "SEEK" disappear from the display.
NOTE
The initial mode is DX SEEK.
4
Press the g DN or f UP button to move
downward or upward one step respectively until the
desired station frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo FM
station is tuned in.

Automatic Seek Tuning

1
Press the SOURCE button to select the radio mode.
2
Press the BAND button repeatedly until the desired
radio band is displayed.
Each press changes the band:
→ FM1→ FM2→ FM3→ MW → LW
3
Press the TUNE button to illuminate the DX and SEEK
indicators in the display.
The SEEK indicator illuminates. With the DX mode
activated, both strong and weak stations will be tuned
in the Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
illuminate for a few seconds. Now, only strong stations
will be tuned.
12
-EN
BAND
Preset buttons (1 through 6)
4
Press the g DN or f UP button to automatically
seek a station downward or upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next station.

Manual Storing of Station Presets

1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press the F button so that the "FUNC" indicator light
goes out. Press and hold the Preset buttons (1
through 6) that you want to store the station on for at
least 2 seconds.
The selected station is stored. The display shows the
band, preset No. with a triangle (9) and station
frequency memorized.
3
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2, FM3,
MW and LW).
NOTE
If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with
the new station.