Automatic Memory Of Station Presets; Tuning To Preset Stations - Alpine CDA-7894RB Owner's Manual

Automatic Memory of Station Presets

1
Press the BAND button repeatedly until the desired
radio band is displayed.
2
Press and hold the A.ME button for at least 2 seconds.
The tuner will automatically seek and store 6 strong
stations in the selected band in order of signal strength.
The frequency on the display continues to change
while the automatic memory is in progress.
When the automatic memory has been completed,
the tuner goes to the station stored in the preset
location No. 1.
NOTE
If no stations are stored, the tuner will return to the original
station you were listening to before the auto memory procedure
began.

Tuning to Preset Stations

1
Press the BAND button repeatedly until the desired
band is displayed.
2
Press the F button so that the "FUNC" indicator light
goes out. Then press the station preset button that has
your desired radio station in memory.
The display shows the band, preset number with a
triangle and frequency of the station selected.
13
-EN