Step 8: Registering Stations - Aiphone IS SERIES Manual

Step 7:
IP Unit Registration - Host
A. Select IP unit registration from the menu on left.
B. Scroll down and click IP unit search in the lower right (see Figure 7.1).
C. Check the station(s) needing to be added to the Imported IP units list. Click
Add to the imported IP units list to add them. Any units not appearing can be manually entered (see Figure 7.2).
Figure 7.1: IP Unit Registration - IP Unit Search
D. Click Port number auto-setting to assign all stations the required ports to all stations that need to communicate
(see Figure 7.3).
E. Click Temporarily stored to save changes.
Figure 7.3: Port Number Auto-setting
Step 8:
Registering Stations
A. Select Registering stations from the menu on left.
B. The Registering stations table will be populated based on the settings made in Step 7. Enter a Station number and
Station name for each door/master unit (see Figure 8.1).
C. Click Temporarily stored to save changes.
Figure 8.1: Registering Stations
6 | IS Series IP Direct System Programming Guide
Figure 7.2: Manual Entry