Auto Recording; Manual Recording; How To Perform Manual Recording - Aiphone IS-SOFT Operation Manual

Auto recording

When the call button is pressed at a video door station, a
snapshot or video of the image at the door (and sounds
depending on the setting) is recorded automatically.
The auto recording is also performed when receiving a
*
communication transferring.
When [Audio Recording] is set to ON:
When called from a video door station and a communication
•
begins, the video image at the station and the talk between
both sides are automatically recorded.
When called from an audio door station or room sub station
•
and a communication begins, the talk between both sides is
automatically recorded.
When called from a master station, the recording of the talk
•
between both sides begins immediately. The pre-tone is also
recorded.
If you want to stop video recording, click
* turns into .
NOTES:
• During recording, turns into
illuminated.
A snapshot or video recording begins when the call button is
•
pressed at the target station, and a sound recording begins when a
talking begins.
.
and the square part in is

Manual recording

You can record a snapshot or video of the image at the
door (and sounds depending on the setting) manually in the
following states.
• When called from a video door station
• When monitoring a video door station
• When communicating with a video door station
When [Audio Recording] is set to ON:
Sounds are also recorded in the following states.
When monitoring a sub station
•
When communicating with a sub station or master station
•

■ How to perform manual recording

Snapshot recording
Click when called from, monitoring or communicating
with a video door station.
NOTE:
You cannot record sounds.
Video recording
You can also record a talk between you and a sub station or
*
master station by this method depending on the setting.
1
Click when called from, monitoring or
communicating with a video door station.
* turns into during recording.
2
Click to stop video recording.
NOTES:
•
When you click while recording during monitoring, recording
continues until the set communication time has elapsed or until
is clicked.
• When communication starts while recording during monitoring,
you can continue the recording. When the communication or
monitoring ends, recording stops.
•
During recording, the square part in is illuminated.
29