Performing Calling, Monitoring, Paging And Chime Paging On The Pc Master Station; Searching For A Station, Zone Or Remote Site - Aiphone IS-SOFT Operation Manual

PERFORMING CALLING, MONITORING, PAGING AND
CHIME PAGING ON THE PC MASTER STATION
The following describes how to operate the PC master station to perform calling, monitoring, paging and chime paging.

Searching for a station, zone or remote site

Read this section before you perform calling, monitoring, paging or chime paging on a PC master station for the fi rst time to learn how
to search for stations, zones or remote sites. The search can be performed in the following search methods by using the search items,
dial keys or speed dial buttons to suit your needs.
Searching for a station, zone or remote site
from the list (→P. 21)
A B C D
Search items: , , ,
Searching for a station or zone by number
using the dial keys (→P. 23)
■ Basic procedure for selecting the search items
A H
The search items – can be selected from the standby mode or the SEARCH LIST.
A B
* The items and can be selected from both the standby mode and the SEARCH LIST.
* A remote site can be selected by using the search item
[In the standby mode]
Click the corresponding button on
E F
( F is for a remote site.)
, ,
F
,
to select the target search item
Searching for a station, zone or remote site
from the placed call or received call list (→P. 24)
G
Search items:
Selecting a station, zone or remote site by
using the speed dial buttons (→P. 24)
G H
, , or the speeds dial buttons.
A B G
, ,
Search items
B
STATIONS BY AREA (→P. 22)
G
Placed calls (→P. 24)
Click to display the SEARCH LIST.
A
NAME SEARCH (→P. 21)
H
Received calls (→P. 24)
H
,
H
or shown below.
19