Searching For A Station Or Zone By Number Using The Dial Keys - Aiphone IS-SOFT Operation Manual

F
Searching for a remote site as the target of
calling, paging or chime paging from the list
[REMOTE SITE]
1
Select [REMOTE SITE] from the SEARCH LIST.
All the registered remote sites are displayed in the list.
2 Click to select the target site (so that it is
highlighted).
After this step, you can call the pilot station of the ta
*
site with the "Normal" priority by clicking
For other calling operations such as selecting the priority,
refer to P. 25.
3
After clicking , select the performance you want
to do from [CALL], [PAGING] and [CHIME] from the
list (so that it is highlighted).
4
Start calling, paging or chime paging by following the
procedure for the corresponding performance.
(→P. 25-27)
NOTES:
Before you perform calling, paging or chime paging to a
•
remote site, confi rm what unit(s) in the site will receive and/or
respond to your performance.
You cannot select two or more remote sites.
•
Searching for a station or zone by number
using the dial keys
1
Click
rget
2
Enter the number of the station or zone you want
.
to search for by using the dial keys in the standby
mode.
The entered numbers are displayed, and all the stations
and/or zones whose numbers begin with the entered
number are displayed in the list.
The search is narrowed down whenever a fi gure is
*
added.
3 Click
that it is highlighted).
You can select up to 5 stations and/or zones.
*
4 Start calling (talking), monitoring or paging by
following the procedure for the corresponding
performance.
to display the Dial keys window.
to select the target station and/or zone (so
(→P. 25-27)
(→P. 21)
23