USING THE PC MASTER STATION
RECEIVING AND ANSWERING A CALL ON THE PC MASTER STATION
The following describes the communication method using a PC master station.
When receiving a call from a remote site, the operation methods are the same as described below, however it may take a longer
*
time for some operations and their responses. For example, there may be a time difference between a call starting at a remote site
and the call tone ringing on the target (PC) master station in your site.
Receiving a call
Door station
(in your site or a remote site)
Press
1
The call tone rings, and the corresponding display appears.
The call tone from a sub station differs from the setting in the Setting window. (→"SETTING MANUAL")
*
e.g.) When called from a video door station in your site
The video image at the calling station is
displayed following the symbol image.
* It may take long until a video image appears.
When an audio door station, room sub station or another (PC) master station calls in, the station type image is displayed. (The
*
image differs from the calling station type.) When called from a remote site, the remote site symbol image is displayed.
An incoming call from a (PC) master station will be a direct voice call. (However, when the PRIVACY mode is set to "Privacy 2",
*
you will be notifi ed of an incoming call by the display information and call tone.)
Depending on the system confi guration, it may take a while before talking begins when answering a call with a (PC) master
*
station.
NOTES:
A PC master station cannot receive two or more calls at a time.
•
A call or talk may not be possible when the communication path is fully occupied.
•
Video images at the target video door station may not appear on the monitor when the video path is fully occupied even though a call or talk
•
is possible.
12
Room sub station
(in your site or a remote site)
or
Press
or
Lift the
handset.
Master station
(in your site or a remote site)
or
(See the "OPERATION
MANUAL" for the standard
(IP) system or network
direct system.
The station no. and station name are displayed.
(For a remote site, the number and name of the site are displayed.
The station name will not be displayed.)
Another PC master station
(in your site or a remote site)
or
(See page 25 for
how to call from a
PC master station.)