Mtest:folding - Agilent Technologies Infiniium 90000 Series Programmer's Manual

24
Mask Test Commands

:MTESt:FOLDing

(Clock Recovery software only)
Command
This command is only available when the E2688A Clock Recovery Software is installed.
N O T E
:MTESt:FOLDing {{ON | 1} | {OFF | 0}}
The :MTESt:FOLDing command enables (ON) or disables (OFF) the display
of the real time eye. When enabled, an eye diagram of the data will be
generated syperimposed on the recovered clock. Refer to the
:MEASure:CLOCk commands for clock recovery.
Example This example enables the display of the real time eye.
myScope.WriteString ":MTEST:FOLDING ON"
Query

:MTESt:FOLDing?

The :MTESt:FOLDing? query returns the current state of clock recovery
folding.
Returned Format
[:MTESt:FOLDing] {1 | 0} <NL>
Example
myScope.WriteString ":MTEST:FOLDING?"
varValue = myScope.ReadNumber
Debug.Print FormatNumber(varValue, 0)
See Also •
•
•
•
•
•
•
450
":MEASure:CLOCk" on page 495
":MEASure:CLOCk:METHod"
":MEASure:CLOCk:METHod:ALIGn"
":MEASure:CLOCk:METHod:DEEMphasis"
":MEASure:CLOCk:METHod:EDGE"
":MEASure:CLOCk:METHod:JTF"
":MEASure:CLOCk:METHod:OJTF"
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
on page 496
on page 498
on page 499
on page 500
on page 502
on page 504