Agilent Technologies 11713A Operating And Service Manual page 35

Verification
Operator's Check for Local Operation
2. Press the LINE ON/OFF switch to ON. Switch should remain in the
ON position and the green switch indicator LED should illuminate.
All numbered pushbutton LEDs should be on and LOCAL LED
should be on.
3. Depress the 10 numbered pushbuttons on the driver front panel.
Each LED should alternate between off and on as each key is
pressed.
In addition, if any equipment is connected (attenuators, relays, or
switches), an audible click should be heard from the unit actuated.
Pressing any numbered pushbutton should not cause any other
pushbutton to change state.
4-4 11713A Operating and Service Manual