Advertisement
PROBLEMS
A. Display flashes the
Time-of-Day
B. No Display - E.R.C.
totally inoperative
C. No Display - Range still
operates in bake, broil,
clean functions.
D. Dim Display - Range
may or may not operate
E. Display operates
normally. Bake or broil
relays do not operate.
POSSIBLE CAUSE
1. Power failure.
1.
No power to range.
2.
No voltage to relay/power
supply circuit board.
1. Defective E.R.C.
1.
Low supply voltage to
range.
2.
Low volatge to E.R.C.
3.
Defective E.R.C.
1. Open bake/broil relay coil.
CORRECTION
1. This is a normal condition wh
Press the "CLOCK" button a
1.
Check house fuse or circuit b
wall outlet or junction box.
2.
Check for 120 VAC at circuit
If no voltage is indicated, che
indicated, replace E.R.C.
1. Replace E.R.C.
1. Check input voltage at wall o
should be 108 - 132 VAC). I
VAC, contact power compan
voltage checks good, procee
Check for 108 - 132 VAC to
E2.
If voltage is low, check wirin
terminals E1 and E2.
If Steps 1 and 2 check good
1. If Bake/On or Broil/On appe
VAC from terminals E2 to E4
terminals E2 to E6 and E7 fo
E4/E6 then resolve loss of p
E7 or E5 replace E.R.C.
Advertisement
