Example Xmodem Firmware Upload Using Hyperterminal; Uploading A Configuration File Via Console Port; Figure 10-16 Menu 24.7.1 As Seen Using The Console Port; Figure 10-17 Example Xmodem Upload - ZyXEL Communications Prestige 310 User Manual

Prestige 310 Broadband Sharing Gateway
To upload router firmware:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atur" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
4. After successful firmware upload, enter "atgo" to restart the
Warning: Proceeding with the upload will erase the current router
firmware.

Figure 10-16 Menu 24.7.1 as seen using the Console Port

Step 2.
After the "Starting Xmodem upload" message appears, activate the Xmodem protocol on your
computer. Follow the procedure as shown previously for the HyperTerminal program. The
procedure for other serial communications programs should be similar.

Example Xmodem Firmware Upload Using HyperTerminal

Click Transfer, then Send File to display the following screen.
After the firmware upload process has completed, the Prestige will automatically restart.

Uploading a Configuration File Via Console Port

Step 1. Select 2 from Menu 24.7 — System Maintenance — Upload Firmware to display Menu 24.7.2
— System Maintenance — Upload Router Configuration File. Follow the instructions as
shown in the next screen.
10-14
Menu 24.7.1 - System Maintenance - Upload Router Firmware
Xmodem upload on your terminal.
router.
Do You Wish To Proceed:(Y/N)

Figure 10-17 Example Xmodem Upload

Type the firmware file's
location, or click
Browse to look for it.
Choose the Xmodem
protocol.
Then click Send.
Firmware and Configuration Maintenance