Figure 4-3 Menu 11.1 Remote Node Profile For Pppoe Encapsulation; Table 4-3 Table 4-3 Fields In Menu 11.1 (Pppoe Encapsulation Specific Only) - ZyXEL Communications Prestige 310 User Manual

configuration of the broadband modem at the customer site.
By implementing PPPoE directly on the Prestige (rather than individual computers), the computers on the
LAN do not need PPPoE software installed, since the Prestige does that part of the task. Furthermore, with
NAT, all of the LANs' computers will have access.
Enable PPPoE in menu 11.1 by pressing the [SPACE BAR] to select PPPoE in the Encapsulation field.
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPPoE
Service Type= Standard
Service Name=
Outgoing=
My Login=
My Password= ********
Authen= CHAP/PAP
Press Space Bar to Toggle.

Figure 4-3 Menu 11.1 Remote Node Profile for PPPoE Encapsulation

The next table describes the fields NOT already described in Table 4-1.

Table 4-3 Table 4-3 Fields in Menu 11.1 (PPPoE Encapsulation Specific Only)

FIELD
Authen
Remote Node Setup
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
This field sets the authentication protocol used for
outgoing calls.
Options for this field are:
CHAP/PAP - Your Prestige will accept either CHAP or
PAP when requested by this remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
Prestige 310 Broadband Sharing Gateway
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-up Connections=
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
EXAMPLE
CHAP/PAP
4-5