Procedure For Configuring Menu 1; Configuring Dynamic Dns; Figure 2-9 Menu 1 - General Setup; Table 2-5 General Setup Menu Fields - ZyXEL Communications Prestige 310 User Manual

Prestige 310 Broadband Sharing Gateway

2.7.2 Procedure For Configuring Menu 1

Step 1. Enter 1 in the Main Menu to open Menu 1 - General Setup (shown next).
Step 2. Fill in the required fields. Refer to the table shown next for more information about these fields.
FIELD
System Name
Domain Name
Edit Dynamic
DNS
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.

2.7.3 Configuring Dynamic DNS

To configure Dynamic DNS, go to Menu 1 — General Setup and press select Yes in the Edit Dynamic
DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as shown next.
2-12
System Name= xxx
Domain Name=zyxel.com.tw
Edit Dynamic DNS= No
Press ENTER to Confirm or ESC to Cancel:
Figure 2-9 Menu 1 — General Setup

Table 2-5 General Setup Menu Fields

Choose a descriptive name for identification purposes. It is
recommended you enter your computer's "Computer name" in this
field. This name can be up to 30 alphanumeric characters long.
Spaces are not allowed, but dashes "-" and underscores "_" are
accepted.
Enter the domain name (if you know it) here. If you leave this field
blank, the ISP may assign a domain name via DHCP. You can go to
menu 24.8 and type "sys domainname" to see the current domain
name used by your gateway.
If you want to clear this field just press the [SPACE BAR]. The
domain name entered by you is given priority over the ISP assigned
domain name.
Press the [SPACE BAR] to select Yes or No (default). Select Yes to
configure Menu 1.1 — Configure Dynamic DNS (discussed next).
Menu 1 - General Setup
DESCRIPTION
Hardware Installation and Initial Setup
EXAMPLE
P310
zyxel.com.tw
No