Teledyne 7120 Operating Instructions Manual page 16

2 Installation
System Alarm:
Further detail can be found in chapter 4, section 4-5.concentration is
below threshold).
• Can be configured as failsafe or nonfailsafe.
• Can be configured as latching or nonlatching.
• Can be configured out (defeated).
System Alarm:
Further detail can be found in chapter 4, section 4-5.
2-8
concentration is below threshold).
• Can be configured as failsafe or nonfailsafe.
• Can be configured as latching or nonlatching.
• Can be configured out (defeated).
Actuates when DC power supplied to circuits is
unacceptable in one or more parameters. Permanently
configured as failsafe and latching. Cannot be de-
feated. Actuates if self test fails.
(Reset by pressing
press again and any other button EXCEPT
System to resume.
Actuates when DC power supplied to circuits is
unacceptable in one or more parameters. Permanently
configured as failsafe and latching. Cannot be de-
feated. Actuates if self test fails.
(Reset by pressing
press again and any other button EXCEPT
System to resume.
Teledyne Analytical Instruments
button to remove power. Then
button to remove power. Then
Model 7120