744
HART Mode Users Guide
Communication Operations
Figure 2 shows the HART Mode menu tree. Availability of
some elements in the menus depends on which
transmitter you are using, and whether the transmitter is
configured by itself on a current loop or in a multidrop
connection.
Viewing Process Variables
From the Active Device screen press the
to view more device variables and their continuously
updated values. To see additional information, press the
softkey.
Next Page
8
Setup Operations
The
setup functions:
softkey
Process
Basic
From the Active Device screen press the
softkeys to access the read/write Basic Setup screen. You
can use this screen to clone a transmitter as described at
the end of this manual.
pe08s.bmp
softkey provides access to the following five
Setup
Basic
Sensor
Device Identification
HART Output
HART Information
and
Setup
Basic
pe09s.bmp