Hart Output; Hart Information - Fluke HART 744 User Manual

HART Output

From the Active Device screen press the
softkeys to access the read/write HART Output
Output
screen. Here you can change the Poll Address (0 = single
transmitter, any other address = multidrop), and control
burst mode.

HART Information

and From the Active Device screen press the
Setup HART
Information
Information screen. This screen shows more complete
information about the transmitter model, hardware and
software revision numbers, and how many preambles it
sends.
pe12s.bmp
Documenting Process Calibrator HART Mode
Communication Operations
softkeys to access the read-only HART
and
Setup HART
pe13s.bmp
11