Sensor; Device Identification - Fluke HART 744 User Manual

744
HART Mode Users Guide

Sensor

From the Active Device screen press the
softkeys to access the read-only Sensor Setup
Sensor
screen. This is where you can view information about the
sensor in the transmitter, including serial number, limits,
and span. The limits shown are the absolute limits for the
sensor. (The Upper Range Value (URV) and Lower
Range Value (LRV) are different, and are viewable and
programmable through the Basic Setup screen.)
10

Device Identification

and From the Active Device screen press the
Setup
Device Identification
transmitter. You can program the Tag, Message, Date,
and Descriptor registers in the transmitter using this
screen.
pe10s.bmp
Setup
softkeys to view information about the
and
pe11s.bmp