Setting Date And Time Of Day; Measurement Connections; Date/Time Selection - Fluke 2620A User Manual

Setting Date and Time of Day

The instrument features a built-in, battery-maintained clock and calendar. Verify or
change the settings using the steps shown in Table 3-13. If necessary, refer to "Entering
and Changing Numeric Values" for a more detailed description of the number changing
technique used here.
PRESS CLOCK
THESE (
BUTTONS: ])
TO SELECT
FROM
THESE
CHOICES:
Note: The last press completes clock and calendar setting and returns the instrument to
Inactive Mode.
Pressing during this sequence also returns the instrument to Inactive Mode; all entries to
this point are discarded, and the clock/calendar settings are left unchanged.

Measurement Connections

To avoid electric shock:
When the input module is installed, consider all channels
with connections as accessible terminals that may be
hazardous live.
Disconnect the input module before touching or changing
external wiring.
Remove inputs from live voltages before opening the input
module.

3-13. Date/Time Selection

Year Month.Day
"YEAR" "Mn.dY"
00-99 01-12.01-31
Warning
Operating the Instrument from the Front Panel

Measurement Connections

Hour.Minut
e" Hr.nn"
00-23.00-59
3
3-17