2620A, 2625A
Users Manual
Press these
buttons:P
To select from
these choices:
Note 1.
Note 2.
Hold
, and press
"CLEAr" appears in right display
Front Panel Lock out Conditions
Various methods are available to prevent accidental use of the front panel buttons. These
actions can be initiated from either the front panel or the computer interface.
Front Panel Review Only Function
Access the Review Array (press
Press
annunciator comes dim).
,
All other front panel buttons are locked out, yielding a long beep when pressed. Press
both
instrument to normal front panel button operation (regular Review Array display.)
Front Panel Monitor Only Function
First place the instrument in the Monitor Function (press
on). Then press
(REM annunciator comes on).
3-26
Table 3-17. Autoprint/Memory Storage Selection
Destination
("dESt") (Note
MODE
)
"Print"
Sends data to be printed through the RS-232 interface.
"StorE"
Sends data to be stored in memory. (Hydra Data Logger only.)
"both"
Sends data to be stored and printed (Hydra Data Logger only.)
"ALL"
Measurements for all defined channels are printed/stored when a scan occurs.
"ALAr"
Measurements for all defined channels are printed/stored when a scan occurs
and at least one channel is in alarm.
"trAnS"
Measurements for all defined channels are printed/stored when a scan occurs
and at least one channel has transitioned into or out of alarm since the last
scan.
Table 3-18. Clearing Memory Storage
To Initiate
"no" to exit without clearing
"YES"
and
simultaneously to activate the Review Only function (REM
,
, and
can now be used to view the various elements of the Review Array.
and
again to deactivate the Review Only function and return the
and
1)
Print
StorE
both
To Confirm
to exit without clearing
, REVIEW annunciator comes on)
simultaneously to activate the Monitor Only Function
Mode ("MOdE")
(Note 2)
ALL
ALAr
trAnS
To Activate
, MON annunciator comes