Adjust Display Contrast; Set Language; Set Date And Time - Fluke BT521 User Manual

BT521
Users Manual

Adjust Display Contrast

To adjust display contrast:
1. Push  to open the Setup menu.
Contrast is already highlighted.
2. Push the – softkey to lighten contrast, or push the + softkey to darken contrast.
If – is pushed too far, the display is blank.
3. Push the Back softkey to return to normal operation.

Set Language

The default display language is English. To select another language:
1. Push  to open the Setup menu.
2. Use L to move the menu selector to highlight Language/English.
3. Push the Select softkey to open the Language menu.
4. Use L and  to highlight the desired language, and then push the Confirm softkey.
5. Push the Confirm softkey to return to normal operation.

Set Date and Time

The internal clock of the Product is used on the display and for time-stamping recorded
measurements.
To change the date and time:
1. Push  to open the Setup menu.
2. Use L and  to highlight General and push the Select softkey.
Date/time is selected by default.
3. Push the Adjust softkey to open the Date/time – Adjust screen.
4. Use  and  to highlight the field to be edited. Use  and L to increase or decrease
value.
5. When the correct date and time is set, push the OK softkey.
6. Push the Back softkey to return to normal operation.
To change the date format:
1. Push  to open the Setup menu.
2. Use L and  to highlight General and push the Select softkey.
Date/time is selected by default.
3. Push the Format softkey to open the Date format menu.
4. Use L and  to highlight the correct date format.
5. Push the Confirm softkey.
6. Push the Back softkey to return to normal operation.
2-2
Note