Usage And Keeping Of Paper Sheet Set - Mitsubishi CP8000DW Operation Manual

USAGE AND KEEPING OF PAPER SHEET SET

2 2 2 2 2
BEFORE PRINTING
• Fingerprints or dust on the paper's printing surface may degrade print quality and cause
paper jams. When not cutting the paper by FEED & CUT procedure while replacing the
print paper, 2 or 3 images may be printed with a blank part due to hand's dust or oil.
• When print paper is rapidly transferred from a cool place to a hot place, vapor or dew is
generated on the paper's surface causing paper jams or degraded print quality. Leave
the print paper in the room to stabilize its temperature before using it.
• If FEED & CUT procedure is repeated while installing the print paper, the indicated number
of prints may not be done. Replacing the print paper before it is used up, the indicated
number of prints may also not be done.
• Do not put or store the print paper in a upright position. It may cause some slack, and the
print paper may get out of shape.
2 2 2 2 2
AFTER PRINTING AND STORAGE
Surface-laminated print paper which is durable and keeps picture quality is suitable for
this unit.
2 2 2 2 2
AFTER PRINTING
• When the printed paper is touched by a wet hand, the print may be discolored.
• If the paper absorbs nonvolatile organic solvents (alcohol, ester, ketone etc.) the print may
be discolored.
• Discoloration of prints will be accelerated if the print paper comes into contact with soft
vinyl chloride such as transparent tape, etc.
• Avoid storing prints in direct sunlight or places with high humidity.
2 2 2 2 2
STORAGE
• Leaving the print paper in contact with PVC- based materials causes color of print paper to
come off and to be stained.
• Never store print paper in places that are close to heater, or in direct sunlight.
Keep print paper in a place where;
Temperature : 5 - 30 C
Humidity : 20 - 60 %RH
19