Table of Contents
Advertisement
3.3.12 Set up a print Interval
Printing is interrupted at the number that you input in this mode for cleaning a
head.
• The counter is reset automatically after you power down a machine even if print
jobs don't reach the number that you input.
• When print jobs reach the number that you input, "Restart" is displayed on the LCD.
Then you need to press a enter button to reset the counter.
1.
In the ready state, press the menu button
once, press the + button until "Interval Set"
displays on the LCD.
2.
Press the enter button to display a setting
state of "Interval Set".
・default setting is 0 (disable this mode)
3.
Press the enter button after input Interval
setting.
4.
Press the clear button repeatedly until the
ready state is displayed.
[Useful tip]
It can be set from 10 times to 500 times in increments of 10 times.
To change values, use the following buttons:
menu button: Increment the number by 100, + button: Increment the number by 10
loading button: Decrement the number by 100, - button: Decrement the number by 10
Chapter 3
Interval Set
Interval
Interval
-47-
Use of Operation Panel
thermal
0
50
TDP-324
Advertisement
Table of Contents
