Connection With Usb Data Signal Equipment - Mitsubishi CP8000DW Operation Manual

CONNECTIONS

CONNECTION WITH USB DATA SIGNAL EQUIPMENT

CONNECTING TO PERSONAL COMPUTER (EXAMPLE)
2 2 2 2 2
Connect this unit to a personal computer as shown below.
Personal computer
1 1 1 1 1
Connect the unit and the personal computer with a USB cable.
2 2 2 2 2
Set the input select switch on the front panel to USB.
SETTING TO ON LINE STATUS
2 2 2 2 2
1 1 1 1 1
Press the POWER button on the rear panel to turn on this unit.
2 2 2 2 2
Turn on the power of the personal computer connected.
3 3 3 3 3
Confirm that the indicator above ON LINE button on the front panel
is lit.
• If the indicator is not lit, press ON LINE button to light the indicator.
14
To USB port
SCSI
SCSI ID
SCSI
Digital color printer
POWER
AC LINE
SCSI
PARALLEL
USB
POWER
AC LINE
ON LINE