Features And Functions; Front Panel - Mitsubishi CP8000DW Operation Manual

FEATURES & FUNCTIONS
4
3
2
1
1 1 1 1 1
DOOR
D
Open this door when installing print paper or ink sheet.
Press OPEN button on the top to open the door.
2 2 2 2 2
DUST BOX
Holds the paper chips which comes out of the print outlet.
Set the dust box to the unit as the figure shows.
NOTE
The paper chips may not fall into the dust box sometimes
by the setting condition of the unit or the storing condition
of print paper.
3 3 3 3 3
PRINT OUTLET
The printed paper comes out here.
4 4 4 4 4
POWER INDICATOR
When the power is turned on, the indicator illuminates.
5 5 5 5 5
ALARM INDICATOR
When the unit is overheated, this indicator turns on and
off. When the door is open, it illuminates. When other
error occurs, it also illuminates. Refer to page 21.
6 6 6 6 6
SHEET INDICATOR
When an error concerning ink sheet occurs, this indicator
illuminates. Refer to page 21.
7 7 7 7 7
PAPER INDICATOR
When an error concerning print paper occurs, this indicator
illuminates. Refer to page 21.

FRONT PANEL

8 10 11
7
5 6 9
DIGITAL COLOR PRINTER CP8000DW
FEED & CUT COPY
POWER ON LINE SCSI
ALARM SHEET PAPER DATA
PARALLEL
USB
12
13
8 8 8 8 8
DATA INDICATOR
When data is transferring, this indicator turns on and off.
Refer to page 21.
9 9 9 9 9
FEED & CUT BUTTON
B
When pressing this button, the print paper is fed and cut.
When ON LINE indicator is lit, this button is not available.
When pressing this button on OFF LINE status with door
closed, this unit is initialized.
When using this unit for the first time, or whenever the paper
is replaced, this button must be pressed.
A A A A A
COPY BUTTON
B
Press to print the last data which is sent to the unit.
When ON LINE indicator is lit, this button is not available.
B B B B B
ON LINE BUTTON / ON LINE INDICATOR
Press to switch the PC connection between ON and OFF
LINE. When ON LINE is selected, you can control this unit
through your PC. When ON LINE is selected, the indicator
over this button illuminates. Press again to select OFF
LINE(the indicator off).
When pressing this button during continuous printing, the
printing process will be stopped after completing printing.
C C C C C
INPUT SELECT SWITCH
Switches according to the terminal of connected device.
Select one of them before turning on the power.
D D D D D
OPEN BUTTON
Press this button to open the door.
7