Overcoming Paper Jams - Mitsubishi CP8000DW Operation Manual

ERROR MESSAGES & COUNTERMEASURES
1 1 1 1 1
Press OPEN button to open the door.
Make sure that the unit is powered ON when opening the door.
When it is not working, turn off the power once. Then press OPEN button again.
2 2 2 2 2
Remove the ink cassette.
Push down the ink cassette as shown by an arrow
3 3 3 3 3
Take out the print paper.
4 4 4 4 4
Cut the defective part of print paper with scissors.
Make sure to cut the printed part of paper. When printing an image on the printed paper
overlapped, the ink sheet may stick on the print paper and ink sheet may be cut.
5 5 5 5 5
Install the print paper and ink cassette with the ink sheet. (Refer to
page 15-18.)
6 6 6 6 6
On OFF LINE status, press FEED & CUT button.
The setting of this unit is initialized.
22

OVERCOMING PAPER JAMS

1
and pull it out.
NOTE
2
1
FEED & CUT