Using Station Speed Dial; Storing Station Speed-Dial Numbers; Using The Dialpad Buttons To Enter Characters - Mitel 8568 Getting Started Manual

Using Station Speed Dial

You can use Station Speed Dial to store phone numbers for your personal use. Other system
users do not have access to your Station Speed-Dial numbers.

Storing Station Speed-Dial Numbers

You can store up to 10 Station Speed-Dial numbers.
To store a Station Speed-Dial number:
1. With the handset on-hook, dial 383. PROGRAM STN SPD (0-9) OR SCROLL appears.
2. Do one of the following:
3. Enter the name of the speed-dial contact (up to 16 characters). For dialpad character
4. Press # to save the name.
5. Enter the extension number or external number. If you are storing an external number,
6. Press # to save the location. STN SPD BIN # <number> UPDATED appears.

Using the Dialpad Buttons to Enter Characters

You can use the dialpad buttons to enter text or numbers for features such as
Do-Not-Disturb (see
The following are guidelines when entering dialpad characters:
•
•
•
•
•
•
Mitel ® 8568 Telephone User Guide – Issue 1, November 2009
•
Press (Up) or
•
Enter the speed-dial location (0 to 9).
Press # to select the location.
descriptions, see "Using the Dialpad Buttons to Enter
enter the Outgoing Call access code (default code is 8) before you enter the number. Do
not use hyphens or colons in stored speed-dial numbers.
page 45) and Station Speed Dial.
Press (Message) to switch from Alpha Mode to Numeric Mode. The
button stays lit in Alpha Mode and is off in Numeric Mode.
Press (Hold) to move the cursor to the left and delete characters.
Press (Transfer) to move the cursor to the right.
In Numeric Mode, press # for a hyphen (-).
*
In Numeric Mode, press
Press #, (Speaker), or lift and replace the handset to save entries.
(Down) to scroll through the speed-dial locations.
for a colon (:).
Answering and Placing Calls
Characters" below.
(Message)
Page 23