Communication Errorcodes - Sharp UX-222 Operation Manual

COMMUNICATION ERRORCODES
.
RECEPTION
Code ~
ErrorCondition
COM. E-O I
Able to recognize handshake signal, but the handshake signal has errors.
I
1 ~ Line disconnected during reception.
I
2 ~ Cannot recognize the handshake signal from the transmitter side.
I
! Cannot recognize the last handshake signal from the transmitter side.
3 I
~ Cannot recognize the handshake signal for next page from (he transmitter side
4' ~ in the case of mode change.
,
I
5 ~ Cannot recognize the handshake signal for next page from transmitter side.
,
~
7
No response from transmitter or "disconnect signal" is received at receiver side.
1
TROUBLESHOOTING
10-11