Table of Contents
Advertisement
PREPARING TO TRANSMIT A DOCUMENT
Resolution and contrast
If you want, you can adjust the resolution and contrast before sending a document-
RESOLUTION
The UX-222 has 3 resolution settings:
STANDARD:
Use STANDARD for ordinarj' documents. This
fastest and most economical transmission.
FINE:
Use FINE for impro~ed reproduction. especially]
taining small letters or fine drawings.
setting gi~resyou the
with documents con-
HALF TONE:
Use HALF TONE for photographs
and illustrations. The original will be
reproduced in 16 shades of gray.
Ifyou do not make a setting, the machine will automatically send the document in STANDARD (the
default setting can be changed to FINE by adjusting User Switch 1- see "User switches" in Chapter
7).
~~Note:
IIIo~-de~- to tl"a!lsnlit ~ itl~FINE J-esolutio]l, t }zei-eceij'i?~gfa.x-
l~~aclli~le nlust also l~a~e[}zat?-eso[l~tiot~.
If it docs~l't,]SOUJ- nzacl~ijlc Mill autonlati(all> ste]]do~]~to STANDARD.
CONTRAST
The contrast is normally set to AUTO, which means that the machine automatically controls the
contrast, but for very light documents you can change the setting to DARK.
3-4
FAX OPERATIONS
\.
Advertisement
Table of Contents
