Settingup - Sharp UX-222 Operation Manual

SETTING UP
5.
6.
Insert the small modular plug which terminates the
F080TP adaptor line cord into the jack on the back
of the machine marked TEL. LINE. Plug the
F080TP adaptor into the telephone jack on the
wall.
Mount the received document tray by inserting the
tabs of the tray into the holes at the rear of the
machine.
T. Adjust theswitches on the Ieftside of the
ma;hine:
DIAL: This switch sets the mode of dial-
ing. Select
T
if you are on a touch-tone
line, or P if you are on a pulse dial (rotary)
line.
Note:
If this setting is incorrect, you will
not be able to make a call.
SPEAKER VOLUME: Adjust the setting
from high
(H)
to low
(L)
as desired.
RINGING
high (H),
desired.
VOLUME: Set the switch at
medium (M), or low (L) as
—
I
RINGING SPEAKER
VOLUME VOLUME
DIAL
I
WARNING NOTICE: For all units installed in New Zealand, only the T setting for tone dialing is
permitted. The P setting for
pulsedialingdoes notoperateproperlyand must
not be used.
2-4 INSTALLATION