Savin 2018 Operating Instructions Manual page 19

Messages/Second messages
Duplex mode is in off posi-
tion for Tray #
Ethernet Board Error
Exceeded max. print size.
Press FormFeed/JobReset
I/O buffer overflow.
Load paper in Tray #
NV-RAM Error
Output Tray changed.
Paper in duplex unit. Open
cover and remove the paper.
Paper size/type mismatch
Change settings to:
xxx yyy
Parallel I/F Error
Printer Font Error
Causes
The selected paper tray has
not been configured for du-
plex printing.
# indicates the tray number.
An error has occurred in the
Ethernet interface.
The page images to be printed
exceed the maximum print ar-
ea.
The maximum size of the I/O
buffer has been exceeded.
There is no paper in the select-
ed paper tray.
# indicates the tray number.
An error has occurred in the
printer.
The output tray has been
changed because of the paper
size limitation of the selected
tray.
There is a misfeed in the du-
plex unit.
There is no paper tray that
matches the paper settings se-
lected under Auto Tray Select.
xxx indicates the tray number.
yyy indicates the paper size
and the paper type.
An error has occurred in the
parallel interface board.
An error has occurred in the
font file.
Error & Status Messages on the Display
Solutions
Press [JobReset] to change the
paper tray settings or do sin-
gle-sided printing.
For details about the tray set-
tings, see General Settings
Guide.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Press [JobReset] to change the
paper tray settings, or press
[FormFeed] to print regardless.
Increase the size of the I/O
buffer through the Host Inter-
face menu.
Load the tray with paper.
Turn off the main power
switch, and back on again. If
the message appears again,
call your sales or service repre-
sentative.
Select the correct output tray.
Open the cover of the duplex
unit, and remove the misfed
paper.
Press [JobReset] to change the
paper tray settings, or press
[FormFeed] to print regardless.
For details about the paper
tray settings, see General Set-
tings Guide.
Contact your sales or service
representative.
Turn off the main power
switch, and back on again. If
the message appears again,
call your sales or service repre-
sentative.
2
13