Send And Receive Information Using Bluetooth - Kyocera Sprint Torque User Manual

Disconnect a Bluetooth Device
1. Press Home
2. On the PAIRED DEVICES list, touch the device to disconnect.
3. Touch OK.
Unpair from a Bluetooth Device
You can make your phone forget its pairing connection with another Bluetooth device. To
connect to the other device again, you may need to enter or confirm a passcode again.
1. Press Home
2. On the PAIRED DEVICES list, touch
3. Touch Unpair.

Send and Receive Information Using Bluetooth

You can use Bluetooth to transfer information between your phone and another Bluetooth-
enabled device such as a phone or notebook computer. The first time you transfer information
between your phone and another device, you need to enter or confirm a security passcode.
After that, your phone and the other device are paired, and you will not need to exchange
passcodes to transfer information in the future.
Send Information from Your Phone to Another Device
You can send the following types of information, depending on the device you are sending to:
●
Images and videos
●
Contacts
1. Set the receiving device to discoverable mode. You may also need to set it to "Receive
Beams" or "Receive Files". Refer to the device's documentation for instructions on
receiving information over Bluetooth.
2. On the phone, open the application that contains the information or file you want to send.
For example, if you want to send a saved picture, press Home
3. Follow the steps for the type of item you want to send:

Picture or video (in Camera): After capturing a picture or video, touch the thumbnail
and then touch
Tools and Calendar
> Menu > System settings > Bluetooth.
> Menu > System settings > Bluetooth.
> Bluetooth.
next to the device to unpair.
162
> > Gallery.