Group Call Options; Dc Headset Mode; One Touch Dc - Kyocera Sprint Torque User Manual

3. Touch the delete icon next to the listing you want to remove.

Group Call Options

Set the way to end a group call you initiated.
1. Press Home
call options.
2. Select an option:

Allow the call to continue.: Keeps the call active even after you hang up. The call
will remain active until the last member disconnects.

End the call for everyone.: Terminates the call session for all connected members
when you hang up.

DC Headset Mode

You can use the headset button as the DC button.
1. Press Home
2. Select the DC headset mode check box to enable the function.

One Touch DC

You can select the function of the DC button when you press it in standby mode. By default, it
displays your Direct Connect (including Call Alert and Invite) Call logs.
enable or disable the assigned function of the DC button when the phone's display is off in idle
state.
To assign a function to the DC button:
1. Press Home
touch DC.
2. Touch Action and select an option.

Launch DC call log list to display your Direct Connect Call logs.

Launch contacts list to display your Contacts list.

DC selected contact to place a Direct Connect call to a selected number. Select
Contacts, Recent DC's, or New number and enter or select the number to specify.

DC most recent number to place a Direct Connect call to the latest number listed in
your Direct Connect Call logs.

Off to disable one touch DC.
Sprint Direct Connect
> Menu > System settings > Direct Connect settings > Group
> Menu > System settings > Direct Connect settings.
> Menu > System settings > Direct Connect settings > One
66
You can also select to