Answer Direct Connect Calls - Kyocera Sprint Torque User Manual

Answer Direct Connect Calls

When you receive a Direct Connect call, you hear an incoming tone or the phone vibrates,
depending on your settings. You will see the Direct Connect number and the caller's name (if
available) on your screen. You may also hear the caller's voice through the speakerphone.
Default for Direct Connect calls is speakerphone on. You can turn the speakerphone off and
listen to Direct Connect calls through the earpiece as you would a regular call, or you can listen
through a headset.
1. Press the speaker button to either enable or disable the Direct Connect speakerphone
feature.

If you enable the Direct Connect speakerphone (
voice through the speakerphone on the front of the phone.

If you disable the Direct Connect speakerphone (
voice through the earpiece.
2. Accept the incoming call. If available, the caller's name and Direct Connect number also
appear on the display.
3. When the caller has finished speaking, you will hear a tone and see "Push to Talk" on
the display.
4. Press and hold the DC button and wait for a tone to sound and a message ("Me") to
appear onscreen. Continue the Direct Connect call as described previously.
Tip: Touch to dismiss an incoming Direct Connect call.
Tip: Press Menu
Convert a Direct Connect Call to a Phone Call
1. While on a Direct Connect call, touch Convert call.
2. Read the message, and then select a number (if more than two numbers are available)
or touch Convert call. Your phone ends the Direct Connect call and dials the selected
number.
Tip: Quieting incoming calls and increasing your privacy. When you are in an area
where incoming Direct Connect calls may disturb others, or if you wish to increase the
privacy of your calls, please set your speakerphone to "off" and your ringer to "vibrate."
When the speakerphone is off, Direct Connect calls use the phone's earpiece and
microphone, while still utilizing the DC button. You may also use an earbud or other
hands-free device for increased convenience.
Sprint Direct Connect
> Bluetooth to route the audio through a paired Bluetooth device.
), you will hear the caller's
), you will only hear the caller's
56