Insert A Sim Card - Kyocera Sprint Torque User Manual


Turn the battery cover lock clockwise to the locked position.
Note: When you insert the battery, your phone may power on automatically.
2. Charge your battery.

Open the cover of the charger/accessory jack.

Plug the smaller end of the USB cable into the phone's charger/accessory jack.

Plug the other end of the USB cable into the charger, and then plug the charger into
an electrical outlet.
Note: Your phone's battery should have enough charge for the phone to turn on and find a
signal, set up voicemail, and make a call. You should fully charge the battery as soon as
possible.
3. Press and hold the Power button to turn the phone on.

If your phone is activated, it will turn on and search for Sprint service.

If your phone is not yet activated, see

Insert a SIM Card

Your phone comes with a preinstalled SIM (Subscriber Identity Module) card.
Note: Your SIM card should be preinstalled. If you need to reinstall your SIM card, follow the
instructions below.
Note: The SIM included contains information specific to your phone and should be retained
with the phone.
1. Remove the battery cover. See
Get Started
Activate Your Phone
Insert and Charge the
3
for more information.
Battery.