Disconnect Or Unpair From A Bluetooth Device; Send And Receive Information Using Bluetooth - Kyocera Hydro EDGE User Manual

5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in
or Unpair from a Bluetooth
Bluetooth Headset or Car

Disconnect or Unpair from a Bluetooth Device

You can manually disconnect or unpair from a Bluetooth device through the Bluetooth settings
menu.
Disconnect a Bluetooth Device
1. Touch Home
2. On the PAIRED DEVICES list, touch the device to disconnect.
3. Touch OK.
Unpair from a Bluetooth Device
You can make your phone forget its pairing connection with another Bluetooth device. To
connect to the other device again, you may need to enter or confirm a passcode again.
1. Touch Home
2. On the PAIRED DEVICES list, touch
3. Touch Unpair.

Send and Receive Information Using Bluetooth

You can use Bluetooth to transfer information between your phone and another Bluetooth-
enabled device such as a phone or notebook computer. The first time you transfer information
between your phone and another device, you need to enter or confirm a security passcode.
After that, your phone and the other device are paired, and you will not need to exchange
passcodes to transfer information in the future.
Send Information from Your Phone to Another Device
You can send the following types of information, depending on the device you are sending to:
●
Images and videos
●
Contacts
1. Set the receiving device to discoverable mode. You may also need to set it to "Receive
Beams" or "Receive Files". Refer to the device's documentation for instructions on
receiving information over Bluetooth.
Tools and Calendar
Device, and then follow the instructions in
Kit.
> Menu > System settings > Bluetooth.
> Menu > System settings > Bluetooth.
next to the device to unpair.
Disconnect
Connect a
142