Charge The Battery; Insert The Sim Card - Kyocera HYDRO LIFE User Manual

2. Insert the battery, contacts end first,
and gently press into place.
3. Replace the battery compartment
cover and press down firmly on all
sides of the back cover as shown
by the arrows in the figure to make
sure all the tabs are seated and
there are no gaps around the cover.

Charge the Battery

1. Plug the smaller end of the micro-
USB cable into the phone's
charger/accessory jack.
10
2. Plug the other end of the USB cable
into the charger, and then plug the
charger into an electrical outlet.
Note: Your phone's battery should
have enough charge for the phone
to turn on and find a signal, set up
voicemail, and make a call. You
should fully charge the battery as
soon as possible.

Insert the SIM Card

1. Insert your thumbnail or fingernail
into the slit and lift the battery cover.
2. Grasp the white pull-tab extending
from the battery pack and pull the
battery out of its compartment.
3. Use your fingernail to carefully pull
out the SIM card tray.
User Guide